Secutron

Features

• Power input 115VAC 50/60 Hz, 3.2 amp
• 24VDC voltage regulated power limited outputs
• 24VDC  rated @ 10 amp max
• Typical 8.6 mV output voltage ripple
• Separate 1 Amp auxiliary output with built-in and remote reset capability
• Two (2) outputs may be paralleled for more power on an indicating circuit
• Two (2) Class A or two (2) Class B FACP input
• Two (2) NC dry contact trigger inputs
• Programmable supervised indicating circuit outputs: Four (4) Class B or Two (2) Class A or One (1) Class A and Two (2) Class B
• Two (2)-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate
• Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit)
• March Time
• Compatible with 12VDC or 24VDC fire panels
• Filtered and electronically regulated output
• Output loop supervision steered to input 1 or input 2
• Common trouble input and output
• Ground fault detection
• Built-in charger for sealed lead acid or gel type batteries
• Automatic switchover to stand-by battery when AC Fails
• Zero voltage drop when switching over to battery backup
• Thermal and short circuit protection with auto reset
• Input and output status LED indicators
• AC fail supervision (form "C" contact, 1 amp / 28VDC)
• Factory set for 1 minute with optional 6 hour delay setting (field selectable).
• Battery presence and low battery supervision (form "C" contact, 1 amp / 28VDC)
• Horn/Strobe sync protocols include Mircom, Amseco, Gentex, System Sensor, Faraday and Wheelock
• Unit includes power supply, red enclosure, cam lock, open frame transformer and battery leads.
• Enclosure dimensions: 15.5"H x 12"W x 4.5"D

Order information

• MRP-NPB10A-S
  SECUTRON NAC Power Booster w/Synch Built-in, 10 Amp

Datasheets

• CAT-5004_MRP-NPB10AS_Remote_Power_Supply

Manuals

• Manuals

Sales